Technician Question T4B08
T4B: Operating controls: frequency tuning, use of filters, squelch function, AGC, memory channels, noise blanker, microphone gain, receiver incremental tuning (RIT), bandwidth selection, scanning function; Digital transceiver configuration; DMR code plugs and talk groups
What is the advantage of having a choice of receiver filter bandwidths in a multimode transceiver?
- Permits monitoring several modes simultaneously by selecting a separate filter for each mode
- Permits noise or interference reduction by selecting a bandwidth matching the mode (correct answer)
- Increases the number of frequencies that can be stored in memory
- Increases the amount of offset between receive and transmit frequencies
Correct answer: B, Permits noise or interference reduction by selecting a bandwidth matching the mode
Explanation
A receiver hears all the noise and interference that falls inside its passband. If the filter width matches the signal, the receiver passes the whole signal and rejects everything outside it. Typical widths are a few hundred hertz for CW, about 2.4 kHz for SSB, and wider for AM or FM. A filter wider than the signal only adds noise and nearby stations.
Why the other answers are wrong
- A, Permits monitoring several modes simultaneously by selecting a separate filter for each mode: Selecting a filter changes what the one receiver passes; it doesn't create extra receivers that can monitor several modes at once.
- C, Increases the number of frequencies that can be stored in memory: Memory channel capacity depends on the radio's storage, not on which IF filter bandwidth is selected.
- D, Increases the amount of offset between receive and transmit frequencies: The offset between transmit and receive is a separate setting, such as repeater shift or split operation, and filters don't change it.