Technician Question T7A09
T7A: Station equipment: receivers, transceivers, transmitter amplifiers, RF preamplifiers, transverters; Basic radio circuit concepts and terminology: sensitivity, selectivity, mixers, oscillators, Push-To-Talk (PTT), VFO, modulation
What is the function of the switch which selects either SSB or CW-FM on some VHF power amplifiers?
- Change the mode of the transmitted signal
- Set the amplifier for proper operation in the selected mode (correct answer)
- Change the frequency range of the amplifier to operate in the proper segment of the band
- Reduce the received signal noise
Correct answer: B, Set the amplifier for proper operation in the selected mode
Explanation
The SSB / CW-FM switch configures the amplifier for the type of signal it is given; it does not change the mode itself. SSB has varying amplitude, so it needs linear amplification and a longer hold time on the amplifier's RF-sensed transmit/receive switching. CW and FM have constant amplitude, so they can use simpler settings without distortion.
Why the other answers are wrong
- A, Change the mode of the transmitted signal: The mode is set by the transceiver driving the amplifier; the amplifier only adjusts to amplify that mode properly.
- C, Change the frequency range of the amplifier to operate in the proper segment of the band: This switch does not retune the amplifier to a different part of the band; it handles signals across its rated range.
- D, Reduce the received signal noise: Reducing received noise is the job of a receive preamplifier or filtering, not the power amplifier's mode switch.