Technician Question T7C09
T7C: Antenna and transmission line measurements and troubleshooting: measuring SWR, effects of high SWR, causes of feed line failures; Basic coaxial cable characteristics; Use of dummy loads when testing
Which of the following causes failure of coaxial cables?
- Moisture contamination (correct answer)
- Solder flux contamination
- Rapid fluctuation in transmitter output power
- Operation at 100% duty cycle for an extended period
Correct answer: A, Moisture contamination
Explanation
Water that gets into coax through damaged jackets or poorly sealed connectors raises dielectric loss and corrodes the shield and center conductor. Loss increases and the cable eventually fails. This is why outdoor connectors should be weatherproofed and cable jackets kept intact.
Why the other answers are wrong
- B, Solder flux contamination: Solder flux residue at a connector is poor practice but is not a recognized cause of coaxial cable failure.
- C, Rapid fluctuation in transmitter output power: Coax is a passive conductor and is not harmed by changes in transmitter power that stay within its ratings.
- D, Operation at 100% duty cycle for an extended period: Coax handles continuous duty fine as long as power stays within its rating; duty cycle alone does not cause failure.