Technician Question T8A05
T8A: Basic characteristics of FM and SSB; Bandwidth of various modulation modes: CW, SSB, FM, fast-scan TV; Choice of emission type: selection of USB vs LSB, use of SSB for weak signal work, use of FM for VHF packet and repeaters
Which of the following signal types has the narrowest bandwidth?
- FM voice
- SSB voice
- CW (correct answer)
- Slow-scan TV
Correct answer: C, CW
Explanation
A CW signal is just a carrier switched on and off, so it occupies only about 150 Hz. SSB voice needs about 2.4-3 kHz, slow-scan TV fits in a similar 3 kHz voice channel, and FM voice takes roughly 10-15 kHz. This very narrow bandwidth helps CW get through under weak-signal conditions.
Why the other answers are wrong
- A, FM voice: FM voice is the widest choice, about 10-15 kHz, because frequency deviation spreads the signal well beyond the audio bandwidth.
- B, SSB voice: SSB is narrow for voice at about 3 kHz, but that is still roughly 20 times wider than a CW signal.
- D, Slow-scan TV: Slow-scan TV is sent as audio tones over an SSB or FM voice channel, so it needs about 3 kHz or more, far wider than CW.