Technician Question T8A07
T8A: Basic characteristics of FM and SSB; Bandwidth of various modulation modes: CW, SSB, FM, fast-scan TV; Choice of emission type: selection of USB vs LSB, use of SSB for weak signal work, use of FM for VHF packet and repeaters
What is one characteristic of single sideband (SSB) compared to FM?
- SSB signals are easier to tune in correctly
- SSB signals are less susceptible to interference
- SSB signals have narrower bandwidth (correct answer)
- SSB signals are less susceptible to high SWR
Correct answer: C, SSB signals have narrower bandwidth
Explanation
SSB removes the carrier and one of the two sidebands, so a voice signal occupies only about 3 kHz. A typical FM voice signal spreads over 10 to 15 kHz. Because SSB is narrower, more stations fit in a band. All of the transmitter power also goes into a narrow slice of spectrum, which is why SSB is preferred for weak-signal work.
Why the other answers are wrong
- A, SSB signals are easier to tune in correctly: SSB is harder to tune than FM: a small frequency error makes voices sound high- or low-pitched and garbled, while FM tunes easily.
- B, SSB signals are less susceptible to interference: FM, not SSB, rejects noise and interference better, thanks to its limiters and capture effect; SSB picks up static much like AM does.
- D, SSB signals are less susceptible to high SWR: SWR depends on how well the antenna and feed line are matched, not on the modulation mode, so neither mode tolerates high SWR better.