Technician Question T8A09
T8A: Basic characteristics of FM and SSB; Bandwidth of various modulation modes: CW, SSB, FM, fast-scan TV; Choice of emission type: selection of USB vs LSB, use of SSB for weak signal work, use of FM for VHF packet and repeaters
What is the approximate bandwidth of an FM voice signal on VHF repeaters?
- Less than 500 Hz
- About 150 kHz
- Between 10 and 15 kHz (correct answer)
- Between 50 and 125 kHz
Correct answer: C, Between 10 and 15 kHz
Explanation
An FM signal's width depends on its deviation and its audio frequency. Carson's rule gives an upper estimate: BW ≈ 2 x (5 kHz peak deviation + 3 kHz audio) = 16 kHz. Real speech seldom holds full peak deviation, and most of its energy lies well below 3 kHz, so a typical repeater voice signal occupies about 10 to 15 kHz. That fits 2 m channels spaced 15 or 20 kHz apart.
Why the other answers are wrong
- A, Less than 500 Hz: Under 500 Hz is the width of a CW signal or a narrow digital mode, far too narrow for FM voice.
- B, About 150 kHz: About 150 kHz confuses amateur narrowband FM with wideband FM broadcasting, which uses much larger deviation.
- D, Between 50 and 125 kHz: 50 to 125 kHz would need far more than the 5 kHz peak deviation amateur FM uses; even Carson's upper estimate is only about 16 kHz.