Technician Question T8A11
T8A: Basic characteristics of FM and SSB; Bandwidth of various modulation modes: CW, SSB, FM, fast-scan TV; Choice of emission type: selection of USB vs LSB, use of SSB for weak signal work, use of FM for VHF packet and repeaters
What is the approximate bandwidth required to transmit a CW signal?
- 2.4 kHz
- 150 Hz (correct answer)
- 1000 Hz
- 15 kHz
Correct answer: B, 150 Hz
Explanation
CW is simply a carrier switched on and off in Morse code, so it carries very little information. Its bandwidth depends on keying speed and how sharply the keying edges are shaped. At typical speeds with proper shaping, a CW signal occupies only about 150 Hz. This narrowness lets many CW stations share a small segment and helps weak signals get through.
Why the other answers are wrong
- A, 2.4 kHz: 2.4 kHz is a typical SSB voice filter width, many times wider than an on-off keyed carrier needs.
- C, 1000 Hz: 1000 Hz is much wider than a properly keyed CW signal; it may come from confusing bandwidth with the audio tone pitch heard on receive.
- D, 15 kHz: 15 kHz is the width of an FM voice signal, about 100 times wider than CW.