Technician Question T8B07
T8B: Amateur satellite operation: Doppler shift, basic orbits, operating protocols, modulation mode selection, transmitter power considerations, telemetry, satellite tracking programs, beacons, uplink and downlink mode definitions, spin fading, definition of “LEO”, setting uplink power
What is Doppler shift in reference to satellite communications?
- A change in the satellite orbit
- A mode where the satellite receives signals on one band and transmits on another
- An observed change in signal frequency caused by relative motion between the satellite and Earth station (correct answer)
- A special digital communications mode for some satellites
Correct answer: C, An observed change in signal frequency caused by relative motion between the satellite and Earth station
Explanation
Doppler shift is the apparent change in frequency caused by relative motion between transmitter and receiver. A satellite approaching your station sounds higher than its actual frequency, and one moving away sounds lower. Low-orbit satellites move fast, so the shift is noticeable and greater at higher frequencies. Operators retune during a pass, especially on 70 cm and above.
Why the other answers are wrong
- A, A change in the satellite orbit: Orbital changes come from drag and other forces; Doppler shift concerns frequency, not the orbit itself.
- B, A mode where the satellite receives signals on one band and transmits on another: Receiving on one band and transmitting on another describes the satellite's operating mode, such as U/V, not Doppler shift.
- D, A special digital communications mode for some satellites: Doppler shift is a physical effect that affects every mode, not a digital communications protocol.