Technician Question T8D07
T8D: Non-voice and digital communications: image signals and definition of NTSC, CW, packet radio, PSK, APRS, error detection and correction, amateur radio networking, DMR, WSJT modes, Broadband-Hamnet
Which of the following describes DMR?
- A technique for time-multiplexing two digital voice signals on a single 12.5 kHz repeater channel (correct answer)
- An automatic position tracking mode for FM mobiles communicating through repeaters
- An automatic computer logging technique for hands-off logging when communicating while operating a vehicle
- A digital technique for transmitting on two repeater inputs simultaneously for automatic error correction
Correct answer: A, A technique for time-multiplexing two digital voice signals on a single 12.5 kHz repeater channel
Explanation
DMR (Digital Mobile Radio) uses time-division multiple access (TDMA). Each 12.5 kHz channel is split into two alternating time slots, and each slot can carry a separate digital voice conversation. As a result, one DMR repeater can handle two talk paths at once on a single frequency pair.
Why the other answers are wrong
- B, An automatic position tracking mode for FM mobiles communicating through repeaters: Automatic position tracking of mobiles is what APRS does; DMR is a digital voice system.
- C, An automatic computer logging technique for hands-off logging when communicating while operating a vehicle: DMR is not a logging technique; logging is handled by separate software, not by the radio mode.
- D, A digital technique for transmitting on two repeater inputs simultaneously for automatic error correction: DMR transmits on one repeater input, sharing it by time slot, and does not transmit on two inputs at once for error correction.