Element 1 Question 1-18C3
C1C18: Equipment Faults
If a ship radio transmitter signal becomes distorted:
- Reduce transmitter power.
- Use minimum modulation.
- Cease operations. (correct answer)
- Reduce audio amplitude.
Correct answer: C, Cease operations.
Explanation
A distorted signal means the transmitter is malfunctioning, and 47 CFR 80.90 says transmission must be suspended immediately when a malfunction is detected. It must stay off the air until the fault is corrected. The only exception is traffic about the immediate safety of life or property, and even then transmission must stop as soon as the emergency ends. Turning the power, modulation or audio down does not fix the fault.
Why the other answers are wrong
- A, Reduce transmitter power.: Lower power only makes the distorted signal weaker. The fault and its spurious products remain, and the rule requires suspending transmission, not turning it down.
- B, Use minimum modulation.: Cutting modulation might hide the symptom, but it doesn't repair the fault. Part 80 requires stopping transmission until the malfunction is corrected.
- D, Reduce audio amplitude.: Turning down the microphone audio may reduce overmodulation, but a distorted signal still means a fault, and you must stop transmitting until it is repaired.