Element 8 Question 8-10A5
C8A10: Circuits-2
The block diagram of a typical RADAR system microprocessor is shown in Fig. 8A2. Choose the most correct statement regarding this system.

- The ALU is used for address decoding.
- General registers are used for arithmetic manipulations.
- The control unit executes arithmetic manipulations.
- Address pointers are contained in the general registers. (correct answer)
Correct answer: D, Address pointers are contained in the general registers.
Explanation
The general registers block lists D0–D7 and A0–A7. The D registers hold data, and the A registers are address registers, which hold pointers to memory locations. So address pointers are contained in the general registers. Arithmetic is done by the ALU, the control unit decodes instructions from the IR and sequences operations, and addresses go out through the EAR and the memory/I/O interface.
Why the other answers are wrong
- A, The ALU is used for address decoding.: The ALU performs arithmetic and logic operations. Address decoding is a separate function and is not the ALU's job.
- B, General registers are used for arithmetic manipulations.: General registers only hold the operands and results. The arithmetic itself happens in the ALU, which they feed.
- C, The control unit executes arithmetic manipulations.: The control unit decodes instructions and directs the other blocks. It doesn't do the arithmetic, which is the ALU's job.