Element 8 Question 8-13B6
C8B13: Modulation
The purpose of a modulator in the transmitter section of a RADAR is to:
- Improve bearing resolution.
- Provide the correct waveform to the transmitter. (correct answer)
- Prevent sea return.
- Control magnetron power output.
Correct answer: B, Provide the correct waveform to the transmitter.
Explanation
The modulator turns a low-level timing trigger into a high-voltage pulse of the correct width, shape and timing. That pulse drives the magnetron. Since the magnetron transmits only while the pulse is present, the modulator's waveform determines when and for how long the radar transmits.
Why the other answers are wrong
- A, Improve bearing resolution.: Bearing resolution depends mainly on the antenna's horizontal beamwidth, not on the transmitter's modulator.
- C, Prevent sea return.: Sea return is reduced in the receiver by sensitivity time control (STC, the anti-clutter sea control), not by the modulator.
- D, Control magnetron power output.: Peak power is largely fixed by the magnetron design and the high-voltage supply. The modulator's job is to supply a properly shaped, timed pulse, not to act as a power control.