Element 8 Question 8-14B1
C8B14: Pulse Forming Networks Modulation
The pulse developed by the modulator may have an amplitude greater than the supply voltage. This is possible by:
- Using a voltage multiplier circuit.
- Employing a resonant charging choke. (correct answer)
- Discharging a capacitor through an inductor.
- Discharging two capacitors in series and combining their charges.
Correct answer: B, Employing a resonant charging choke.
Explanation
A charging inductor (resonant charging choke) sits in series between the DC supply and the PFN's capacitance, forming a resonant LC circuit. As the PFN charges, current keeps flowing in the choke, so the PFN voltage overshoots to nearly twice the supply voltage. A charging diode then holds it there. When the switch fires, the pulse can exceed the supply voltage.
Why the other answers are wrong
- A, Using a voltage multiplier circuit.: Diode-capacitor voltage multipliers are a DC power-supply technique. They are not how a line-type modulator charges its PFN above the supply voltage.
- C, Discharging a capacitor through an inductor.: Discharging through an inductor is the pulse (discharge) phase. The voltage boost happens earlier, during resonant charging through the choke.
- D, Discharging two capacitors in series and combining their charges.: Stacking and discharging capacitors in series is not the standard radar modulator method. The boost comes from resonant charging of the PFN.