Element 8 Question 8-18B3
C8B18: Power Supplies
A pulse-width modulator in a switching power supply is used to:
- Provide the reference voltage for the regulator.
- Vary the frequency of the switching regulator to control the output voltage.
- Vary the duty cycle of the regulator switch to control the output voltage. (correct answer)
- Compare the reference voltage with the output voltage sample and produce an error voltage.
Correct answer: C, Vary the duty cycle of the regulator switch to control the output voltage.
Explanation
In a PWM regulator, the switching frequency stays fixed. The modulator widens or narrows each on-pulse in response to the error signal. Average output voltage follows the duty cycle (Vout ≈ D × Vin in a buck converter), so changing the on-time controls the output.
Why the other answers are wrong
- A, Provide the reference voltage for the regulator.: A separate source, such as a Zener or bandgap reference, supplies the reference voltage; the PWM only acts on the error signal.
- B, Vary the frequency of the switching regulator to control the output voltage.: Changing the switching frequency is pulse-frequency modulation, a different method; PWM keeps frequency fixed and varies pulse width.
- D, Compare the reference voltage with the output voltage sample and produce an error voltage.: That describes the error amplifier, which feeds the PWM; the modulator turns the error voltage into a duty-cycle change.