Element 8 Question 8-18B6
C8B18: Power Supplies
Which of the following characteristics are true of a power MOSFET used in a RADAR switching supply?
- Low input impedance; failure mode can be gate punch-through.
- High input impedance; failure mode can be gate punch-through. (correct answer)
- High input impedance; failure mode can be thermal runaway.
- Low input impedance; failure mode can be gate breakdown.
Correct answer: B, High input impedance; failure mode can be gate punch-through.
Explanation
A MOSFET's gate is insulated from the channel by a thin oxide layer, so it draws almost no DC gate current. Its input impedance is therefore very high, which makes it easy to drive at switching speeds. That thin oxide is also its weak point: excess gate voltage or a static discharge can punch through it, shorting the gate and destroying the device.
Why the other answers are wrong
- A, Low input impedance; failure mode can be gate punch-through.: Gate punch-through is a real failure mode, but the insulated gate gives very high input impedance, not low. Low input impedance describes a bipolar transistor's base.
- C, High input impedance; failure mode can be thermal runaway.: The input impedance is right, but MOSFET on-resistance rises with temperature, which tends to limit current. Thermal runaway is the classic bipolar transistor failure.
- D, Low input impedance; failure mode can be gate breakdown.: Gate breakdown is essentially the oxide failure, but the input impedance is high, not low, because the insulated gate draws virtually no current.