Element 8 Question 8-23C2
C8C23: Detectors - Video Amplifiers
Video amplifiers in pulse RADAR receivers must have a broad bandwidth because:
- Weak pulses must be amplified. (correct answer)
- High frequency sine waves must be amplified.
- The RADARs operate at PRFs above 100.
- The pulses produced are normally too wide for video amplification.
Correct answer: A, Weak pulses must be amplified.
Explanation
Radar echoes arrive as weak, very short pulses, often under 1 µs, with steep edges. A pulse that narrow contains a wide spread of frequency components, up to several MHz. The video amplifier therefore needs a broad bandwidth to amplify those weak pulses without rounding their edges. Too little bandwidth would stretch and blur the echoes and degrade range resolution.
Why the other answers are wrong
- B, High frequency sine waves must be amplified.: The video signal is a train of rectangular pulses, not high-frequency sine waves. The RF and IF sine waves are handled in the stages before the detector.
- C, The RADARs operate at PRFs above 100.: PRF sets how often pulses repeat, typically hundreds to a few thousand per second. Bandwidth depends on how short each pulse is, not on the repetition rate.
- D, The pulses produced are normally too wide for video amplification.: This is backward. Radar pulses are very narrow, which is exactly why a wide bandwidth is needed. Wide pulses would need less bandwidth, not more.