Element 8 Question 8-23C6
C8C23: Detectors - Video Amplifiers
The video (second) detector in a pulse modulated RADAR system would most likely use a/an:
- Discriminator detector.
- Diode detector. (correct answer)
- Ratio detector.
- Infinite impedance detector.
Correct answer: B, Diode detector.
Explanation
A pulse radar transmits short bursts of RF, so the IF signal is amplitude-modulated: either an echo is present or it isn't. Recovering the video only means detecting the pulse envelope. A simple diode rectifier with a small RC load does this well, with the fast response and wide bandwidth that short pulses need.
Why the other answers are wrong
- A, Discriminator detector.: A discriminator converts frequency changes into voltage. It detects FM, not the amplitude envelope of radar pulses, though radar AFC circuits do use one.
- C, Ratio detector.: A ratio detector is an FM detector designed to reject amplitude variations. That is the opposite of what pulse video detection requires.
- D, Infinite impedance detector.: An infinite-impedance detector is an AM detector, but it is a tube or transistor circuit used where low loading matters. The simple, wide-band diode is the usual choice.