Element 8 Question 8-24C1
C8C24: Automatic Frequency Control - AFC/ATC
The AFC system is used to:
- Control the frequency of the magnetron.
- Control the frequency of the klystron. (correct answer)
- Control the receiver gain.
- Control the frequency of the incoming pulses.
Correct answer: B, Control the frequency of the klystron.
Explanation
In a conventional marine radar, the magnetron's frequency drifts with temperature and load and cannot be tuned precisely. AFC instead steers the klystron local oscillator. It keeps the difference between the magnetron and klystron frequencies exactly at the receiver's IF, typically 30 or 60 MHz, so the receiver tracks the transmitter automatically.
Why the other answers are wrong
- A, Control the frequency of the magnetron.: The magnetron runs free and drifts. AFC follows that drift by retuning the local oscillator; it does not control the magnetron itself.
- C, Control the receiver gain.: Receiver gain is handled by gain, STC and AGC circuits. AFC deals with frequency, not amplification.
- D, Control the frequency of the incoming pulses.: The echo frequency is set by the magnetron and returned by the target. The receiver cannot change it, only tune its local oscillator to match.