Element 8 Question 8-46F4
C8F46: Equipment Faults-3
It is reported that the RADAR is not receiving small targets. The most likely causes are:
- Magnetron, IF amplifier, or receiver tuning. (correct answer)
- PFN, crystals, or processor memory.
- Crystals, local oscillator tuning, or power supply.
- Fuse blown, IF amp, or video processor.
Correct answer: A, Magnetron, IF amplifier, or receiver tuning.
Explanation
Small, weak echoes are the first to disappear when overall sensitivity drops, while large targets may still show. The likely causes are low transmitted power from an aging magnetron, reduced IF amplifier gain, or a mistuned receiver whose local oscillator is off frequency, which weakens the IF signal.
Why the other answers are wrong
- B, PFN, crystals, or processor memory.: A faulty PFN would distort the pulse or stop transmission entirely, and processor memory faults cause display glitches. Neither selectively drops small targets.
- C, Crystals, local oscillator tuning, or power supply.: Crystals and LO tuning can reduce sensitivity, but a power supply failure would typically disable or disturb the whole display, not just small targets.
- D, Fuse blown, IF amp, or video processor.: A blown fuse shuts down an entire function, so no targets at all would appear, rather than only the small ones.