Element 8 Question 8-46F5
C8F46: Equipment Faults-3
A high magnetron current indicates a/an:
- Defective AFC crystal.
- Increase in duty cycle.
- Defective external magnetic field. (correct answer)
- High standing wave ratio (SWR).
Correct answer: C, Defective external magnetic field.
Explanation
The magnetron's permanent magnet makes electrons circle past the anode cavities instead of flowing directly to the anode. If the magnetic field weakens or is defective, electrons reach the anode more easily, so magnetron current climbs and RF output drops. An abnormally high magnetron current therefore points to a defective external magnetic field.
Why the other answers are wrong
- A, Defective AFC crystal.: The AFC crystal is part of the receiver's frequency-control loop. Its failure mistunes the local oscillator but does not raise magnetron current.
- B, Increase in duty cycle.: Duty cycle is fixed by the selected pulse length and PRF. An abnormally high current on a given range setting points to a fault, chiefly the magnet.
- D, High standing wave ratio (SWR).: High SWR mainly reflects power and causes arcing or frequency pulling. It is not the standard cause of high magnetron current.