Element 8 Question 8-47F4
C8F47: Equipment Faults-4
In a marine RADAR set, a high VSWR is indicated at the magnetron output. The waveguide and rotary joint appear to be functioning properly. What component may be malfunctioning?
- The magnetron
- The waveform generator
- The STC circuit
- The waveguide array termination (correct answer)
Correct answer: D, The waveguide array termination
Explanation
A slotted waveguide array ends in a matched termination, a resistive load that absorbs the energy the slots don't radiate. If that load is burned, cracked or wet, energy reflects back toward the transmitter and VSWR at the magnetron rises. With the waveguide run and rotary joint cleared, the array termination is the remaining part of the RF path to suspect.
Why the other answers are wrong
- A, The magnetron: The magnetron is the source. High VSWR measured at its output shows a mismatch in the load downstream, not in the tube.
- B, The waveform generator: The waveform generator produces timing and trigger signals and has no effect on the RF transmission line match.
- C, The STC circuit: STC varies receiver gain with range. It is a receiver function and cannot cause reflected power at the magnetron.