Element 8 Question 8-47F5
C8F47: Equipment Faults-4
On a vessel with two RADARs, one has a different range indication on a specific target than the other. How would you determine which RADAR is incorrect?
- Check the sweep and timing circuits of both indicators for correct readings. (correct answer)
- Triangulate target using the GPS and visual bearings.
- Check antenna parallax.
- Use the average of the two indications and adjust both for that amount.
Correct answer: A, Check the sweep and timing circuits of both indicators for correct readings.
Explanation
Radar range comes from echo timing: R = c × t / 2, about 12.36 µs of round-trip time per nautical mile. Displayed range depends on the sweep speed and the timing of the range rings and variable range marker. A sweep or timing error makes one set misreport range. Checking each indicator's sweep and timing circuits against specifications shows which one is off.
Why the other answers are wrong
- B, Triangulate target using the GPS and visual bearings.: GPS and visual bearings give position and direction. Triangulating is imprecise for range and doesn't locate the fault in either radar.
- C, Check antenna parallax.: Antenna parallax from mast separation is only a few meters, far too small to explain a noticeable range disagreement.
- D, Use the average of the two indications and adjust both for that amount.: Averaging assumes both sets are equally wrong. It would throw the correct radar out of calibration instead of fixing the faulty one.