Element 8 Question 8-47F6
C8F47: Equipment Faults-4
An increase in the deflection on the magnetron current meter could likely be caused by:
- Insufficient pulse amplitude from the modulator.
- Too high a B1 level on the magnetron.
- A decrease of the magnetic field strength. (correct answer)
- A lower duty cycle, as from 0.0003 to 0.0002.
Correct answer: C, A decrease of the magnetic field strength.
Explanation
The magnetic field keeps electrons in curved paths around the cathode and limits how many reach the anode. If the field weakens (an aging or damaged magnet, or a magnet knocked out of position), more electrons go straight to the anode. The magnetron current meter then reads high, often with poor or unstable RF output.
Why the other answers are wrong
- A, Insufficient pulse amplitude from the modulator.: A smaller modulator pulse applies less voltage to the magnetron, so its current falls rather than rises.
- B, Too high a B1 level on the magnetron.: B is the symbol for magnetic flux density. A stronger field bends electrons more and reduces anode current rather than increasing it.
- D, A lower duty cycle, as from 0.0003 to 0.0002.: Average meter current is peak current × duty cycle. Dropping from 0.0003 to 0.0002 lowers the reading by about a third.