Element 8 Question 8-8A3
C8A08: Components-2
When comparing TTL and CMOS logic families, which of the following is true:
- CMOS logic requires a supply voltage of 5 volts 20%, whereas TTL logic requires 5 volts 5%.
- Unused inputs should be tied high or low as necessary especially in the CMOS family.
- At higher operating frequencies, CMOS circuits consume almost as much power as TTL circuits. (correct answer)
- When a CMOS input is held low, it sources current into whatever it drives.
Correct answer: C, At higher operating frequencies, CMOS circuits consume almost as much power as TTL circuits.
Explanation
A static CMOS gate draws almost no current. Each logic transition, however, charges and discharges capacitance, so dynamic power rises with switching rate (P ≈ C·V²·f). At high frequencies, CMOS dissipation climbs toward that of TTL, whose power comes mostly from steady bias currents. CMOS's power advantage is therefore greatest at low frequencies.
Why the other answers are wrong
- A, CMOS logic requires a supply voltage of 5 volts 20%, whereas TTL logic requires 5 volts 5%.: TTL does need about 5 V ±5%, but CMOS has no 5 V ±20% requirement. Standard CMOS runs over a wide supply range, roughly 3 V to 15 V or more.
- B, Unused inputs should be tied high or low as necessary especially in the CMOS family.: Tying unused inputs is sound practice, since floating CMOS inputs drift and draw extra current. It is not the TTL-versus-CMOS power comparison this item targets.
- D, When a CMOS input is held low, it sources current into whatever it drives.: CMOS inputs are insulated gates and draw essentially no current. It is a TTL input held low that sources current, about 1.6 mA, into the driving stage.