Element 8 Question 8-8A4
C8A08: Components-2
The primary operating frequency of a reflex klystron is controlled by the:
- Dimensions of the resonant cavity. (correct answer)
- Level of voltage on the control grid.
- Voltage applied to the cavity grids.
- Voltage applied to the repeller plate.
Correct answer: A, Dimensions of the resonant cavity.
Explanation
In a reflex klystron, oscillation occurs at the resonant frequency of the cavity the beam passes through. That frequency depends on the cavity's physical dimensions, so they set the primary operating frequency, and mechanical tuning changes it over a wide range. Repeller voltage only fine-tunes the frequency within the narrow band of a repeller mode.
Why the other answers are wrong
- B, Level of voltage on the control grid.: A reflex klystron is not controlled by a control grid the way a triode is. No grid voltage sets its basic operating frequency.
- C, Voltage applied to the cavity grids.: The voltage on the cavity (resonator) grids accelerates the beam and affects power. The cavity geometry, not that voltage, sets the primary frequency.
- D, Voltage applied to the repeller plate.: Repeller voltage gives only fine electronic tuning, a few MHz around the cavity frequency. It does not set the primary operating frequency.