Amateur Extra Question E4B06
E4B: Measurement technique and limitations: instrument accuracy and performance limitations; probes; techniques to minimize errors; measurement of Q; instrument calibration; S parameters; vector network analyzers; RF signals
How much power is being absorbed by the load when a directional power meter connected between a transmitter and a terminating load reads 100 watts forward power and 25 watts reflected power?
- 100 watts
- 125 watts
- 112.5 watts
- 75 watts (correct answer)
Correct answer: D, 75 watts
Explanation
A directional wattmeter reads power traveling toward the load and power bouncing back from it. Whatever is reflected is not absorbed, so the power delivered to the load is the difference: P_load = P_forward - P_reflected = 100 W - 25 W = 75 W. With 25 W reflected out of 100 W, the reflection coefficient magnitude is the square root of 0.25, or 0.5, which corresponds to an SWR of 3:1.
Why the other answers are wrong
- A, 100 watts: This is the forward reading alone and ignores the 25 W that the mismatch sends back toward the transmitter instead of into the load.
- B, 125 watts: Reflected power is subtracted from forward power, not added to it; the load cannot absorb more power than is sent toward it.
- C, 112.5 watts: This adds half the reflected power to the forward reading, which matches no valid relationship; absorbed power is simply forward minus reflected.