Amateur Extra Question E4D09
E4D: Receiver performance characteristics: dynamic range; intermodulation and cross-modulation interference; third-order intercept; desensitization; preselector; sensitivity; link margin
What is the purpose of the preselector in a communications receiver?
- To store frequencies that are often used
- To provide broadband attenuation before the first RF stage to prevent intermodulation
- To increase the rejection of signals outside the band being received (correct answer)
- To allow selection of the optimum RF amplifier device
Correct answer: C, To increase the rejection of signals outside the band being received
Explanation
A preselector is a tuned filter placed ahead of the first RF amplifier or mixer. It passes the band you are receiving and rejects strong signals outside it, including image frequencies. Keeping those signals out of the front end reduces overload, intermodulation and image responses.
Why the other answers are wrong
- A, To store frequencies that are often used: Storing often-used frequencies describes memory channels in the radio's controller, not an RF filter.
- B, To provide broadband attenuation before the first RF stage to prevent intermodulation: Broadband attenuation lowers all signals equally; a preselector is selective, passing the desired band while rejecting signals outside it.
- D, To allow selection of the optimum RF amplifier device: A preselector does not choose amplifier devices; device choice is a design decision, not a receiver operating function.