Amateur Extra Question E4E07
E4E: Noise and interference: external RF interference; electrical and computer noise; line noise; DSP filtering and noise reduction; common-mode current; surge protectors; single point ground panel
Which of the following can cause shielded cables to radiate or receive interference?
- Low inductance ground connections at both ends of the shield
- Common-mode currents on the shield and conductors (correct answer)
- Use of braided shielding material
- Tying all ground connections to a common point resulting in differential-mode currents in the shield
Correct answer: B, Common-mode currents on the shield and conductors
Explanation
A shielded cable works when its currents are differential-mode: equal and opposite, so their fields cancel and the shield holds them inside. Common-mode current flows in the same direction on the conductors and on the outside of the shield. Nothing cancels it, so the cable acts as an antenna, radiating noise or picking up RF. Ferrite chokes and good grounding are used to suppress it.
Why the other answers are wrong
- A, Low inductance ground connections at both ends of the shield: Low-inductance ground connections at both shield ends are good practice that reduces radiation. They do not cause it.
- C, Use of braided shielding material: Braided shielding is the standard, effective shield construction. The braid itself does not make a cable radiate.
- D, Tying all ground connections to a common point resulting in differential-mode currents in the shield: Single-point grounding is meant to prevent ground loops, and differential-mode current is the normal mode that cancels. The real culprit is common-mode current.