Amateur Extra Question E4E06
E4E: Noise and interference: external RF interference; electrical and computer noise; line noise; DSP filtering and noise reduction; common-mode current; surge protectors; single point ground panel
What type of electrical interference can be caused by computer network equipment?
- A loud AC hum in the audio output of your station’s receiver
- A clicking noise at intervals of a few seconds
- The appearance of unstable modulated or unmodulated signals at specific frequencies (correct answer)
- A whining-type noise that continually pulses off and on
Correct answer: C, The appearance of unstable modulated or unmodulated signals at specific frequencies
Explanation
Routers, switches and Ethernet devices run on high-speed clock oscillators and send fast digital data. Harmonics of these clocks leak out through cables and enclosures. The receiver hears them as carriers sitting on specific frequencies. They often drift or wobble and may carry data-like modulation as the traffic changes. Finding a signal like this at one frequency points to digital equipment nearby.
Why the other answers are wrong
- A, A loud AC hum in the audio output of your station’s receiver: A loud AC hum points to ground loops or power supply problems, not the clock-driven RF emissions of network gear.
- B, A clicking noise at intervals of a few seconds: A click every few seconds is typical of electric fences or cycling thermostats, not of network equipment.
- D, A whining-type noise that continually pulses off and on: A pulsing whine suggests sources like motor controllers or chargers. Network gear makes discrete carriers at fixed frequencies instead.