Amateur Extra Question E4E05
E4E: Noise and interference: external RF interference; electrical and computer noise; line noise; DSP filtering and noise reduction; common-mode current; surge protectors; single point ground panel
What is used to suppress radio frequency interference from a line-driven AC motor?
- A high-pass filter in series with the motor’s power leads
- A brute-force AC-line filter in series with the motor’s power leads (correct answer)
- A bypass capacitor in series with the motor’s field winding
- A bypass choke in parallel with the motor’s field winding
Correct answer: B, A brute-force AC-line filter in series with the motor’s power leads
Explanation
A brute-force AC-line filter is a low-pass LC filter. Its series chokes and shunt capacitors pass 60 Hz power freely but strongly attenuate RF. Placed in series with the motor's power leads, it keeps brush and commutator noise from being conducted onto the house wiring, where the wiring would radiate it like an antenna. The motor still gets full power while the RF stays inside.
Why the other answers are wrong
- A, A high-pass filter in series with the motor’s power leads: A high-pass filter would pass the RF noise and block the 60 Hz power, the reverse of what is needed.
- C, A bypass capacitor in series with the motor’s field winding: Bypass capacitors work in shunt across a winding or to ground. One in series with the field winding would interrupt the motor's current.
- D, A bypass choke in parallel with the motor’s field winding: Chokes belong in series to block RF. A choke in parallel with the field winding would shunt current around it rather than filter noise.