Amateur Extra Question E5C11
E5C: Coordinate systems and phasors in electronics: rectangular coordinates; polar coordinates; phasors; logarithmic axes
Which point in Figure E5-1 best represents the impedance of a series circuit consisting of a 300-ohm resistor and an 18-microhenry inductor at 3.505 MHz?
- Point 1
- Point 3 (correct answer)
- Point 7
- Point 8
Correct answer: B, Point 3
Explanation
A series RL circuit has Z = R + jXL. XL = 2πfL = 2π x 3.505 x 10^6 Hz x 18 x 10^-6 H ≈ 396 Ω, so Z ≈ 300 + j400 Ω. In Figure E5-1, resistance is plotted on the X axis and reactance on the Y axis. Inductive (positive) reactance goes above the X axis, so the point at X = +300, Y = +400 is Point 3.
Why the other answers are wrong
- A, Point 1: Point 1 is at 300 - j400, a capacitive impedance. An inductor's reactance is positive, so the point belongs above the resistance axis.
- C, Point 7: Point 7 is at -300 - j400, which has negative resistance and capacitive reactance. Neither fits a resistor in series with an inductor.
- D, Point 8: Point 8 sits near 300 Ω close to the resistance axis, which ignores the inductor's roughly 400 Ω of reactance.