Amateur Extra Question E6B11
E6B: Diodes
What is used to control the attenuation of RF signals by a PIN diode?
- Forward DC bias current (correct answer)
- A variable RF reference voltage
- Reverse voltage larger than the RF signal
- Capacitance of an RF coupling capacitor
Correct answer: A, Forward DC bias current
Explanation
With forward bias, carriers are injected into the PIN diode's intrinsic layer, and its RF resistance drops roughly in step with the DC bias current. More current gives lower RF resistance, and less current gives higher. Placing the diode in series or shunt with the signal path lets a DC control current set the attenuation smoothly. This is how PIN diode attenuators and AGC circuits work.
Why the other answers are wrong
- B, A variable RF reference voltage: The control signal is a DC bias current, not an RF reference voltage; adding RF control would mix with the signal instead of setting a clean resistance.
- C, Reverse voltage larger than the RF signal: Reverse bias larger than the RF peak just holds the diode fully off for switch isolation; it does not give a variable attenuation level.
- D, Capacitance of an RF coupling capacitor: A coupling capacitor only passes RF and blocks DC; its value doesn't control the diode's resistance or the attenuation.