Amateur Extra Question E6C01
E6C: Digital ICs: families of digital ICs; gates; programmable logic devices
What is the function of hysteresis in a comparator?
- To prevent input noise from causing unstable output signals (correct answer)
- To allow the comparator to be used with AC input signals
- To cause the output to continually change states
- To increase the sensitivity
Correct answer: A, To prevent input noise from causing unstable output signals
Explanation
A comparator with hysteresis has two trip points. A rising input must pass an upper threshold, and a falling input must drop below a lower one. Noise on a slowly changing input near the threshold can't flip the output back and forth unless it spans that gap, so the output switches once, cleanly. A little positive feedback creates the hysteresis, as in a Schmitt trigger.
Why the other answers are wrong
- B, To allow the comparator to be used with AC input signals: Comparators handle AC inputs without any hysteresis; hysteresis only stops noise-induced chatter near the threshold.
- C, To cause the output to continually change states: An output that keeps changing state is oscillation or chatter, which is exactly what hysteresis is added to suppress.
- D, To increase the sensitivity: Hysteresis slightly reduces sensitivity, because the input must move through the whole hysteresis band before the output switches.