Amateur Extra Question E6C02
E6C: Digital ICs: families of digital ICs; gates; programmable logic devices
What happens when the level of a comparator’s input signal crosses the threshold voltage?
- The IC input can be damaged
- The comparator changes its output state (correct answer)
- The reference level appears at the output
- The feedback loop becomes unstable
Correct answer: B, The comparator changes its output state
Explanation
A comparator compares an input voltage with a reference (threshold) voltage. Its output sits at one state, usually high, while the input is above the reference and at the other state while it is below. When the input crosses the threshold, the output switches state. In effect a comparator is a one-bit analog-to-digital converter.
Why the other answers are wrong
- A, The IC input can be damaged: Crossing the threshold is normal operation; damage comes only from exceeding the absolute maximum input voltage ratings.
- C, The reference level appears at the output: The output swings to its logic or supply-rail levels, not to the reference voltage; the reference only sets where switching occurs.
- D, The feedback loop becomes unstable: A basic comparator runs open loop, so a threshold crossing has nothing to do with feedback stability; the output simply switches.