Amateur Extra Question E6E07
E6E: Semiconductor materials and packages for RF use
What type of transmission line is often used for connections to MMICs?
- Miniature coax
- Circular waveguide
- Parallel wire
- Microstrip (correct answer)
Correct answer: D, Microstrip
Explanation
Microstrip is a copper trace on one side of a circuit board with a ground plane on the other side. Its characteristic impedance depends on the trace width, the board thickness and the dielectric constant, so a 50-ohm line can be etched right up to the tiny surface-mount MMIC leads. This gives short, controlled-impedance connections at VHF through microwave frequencies.
Why the other answers are wrong
- A, Miniature coax: Miniature coax is used between modules, but it can't attach directly to tiny surface-mount MMIC pads the way an etched board trace can.
- B, Circular waveguide: Circular waveguide is a bulky metal pipe used at high microwave frequencies; it is far too large to connect to the leads of a chip.
- C, Parallel wire: Parallel-wire line is a balanced feed line for antennas; it isn't practical on a circuit board and doesn't match the unbalanced MMIC ports.