Amateur Extra Question E6E08
E6E: Semiconductor materials and packages for RF use
How is power supplied to the most common type of MMIC?
- Through a capacitor and RF choke connected to the amplifier input lead
- MMICs require no operating bias
- Through a resistor and/or RF choke connected to the amplifier output lead (correct answer)
- Directly to the bias voltage (Vcc) lead
Correct answer: C, Through a resistor and/or RF choke connected to the amplifier output lead
Explanation
The common MMIC gain block has only input, output and ground connections. DC bias goes in on the output lead through a dropping resistor, an RF choke, or both. These parts set the device current from the supply voltage while keeping the RF signal out of the power supply. A coupling capacitor then blocks the DC from the next stage.
Why the other answers are wrong
- A, Through a capacitor and RF choke connected to the amplifier input lead: The bias feed goes to the output lead, not the input; also, a series capacitor would block DC, so it couldn't carry supply current.
- B, MMICs require no operating bias: MMICs are active transistor amplifiers and need DC bias current to operate, just like discrete transistor stages.
- D, Directly to the bias voltage (Vcc) lead: The most common MMIC package has no separate Vcc pin; supply voltage is fed to the output lead through a resistor or choke.