Amateur Extra Question E7B02
E7B: Amplifiers: class of operation; vacuum tube and solid-state circuits; distortion and intermodulation; spurious and parasitic suppression; switching-type amplifiers
What is a Class D amplifier?
- An amplifier that uses switching technology to achieve high efficiency (correct answer)
- A low power amplifier that uses a differential amplifier for improved linearity
- An amplifier that uses drift-mode FETs for high efficiency
- An amplifier biased to be relatively free from distortion
Correct answer: A, An amplifier that uses switching technology to achieve high efficiency
Explanation
A Class D amplifier drives its output devices as switches that are either fully on or fully off. An ideal switch wastes almost no power: when it is on, the voltage across it is near zero, and when it is off, the current through it is near zero. Efficiency can therefore exceed 90%. The output is a pulse train, often pulse-width modulated, that is filtered to recover the desired signal.
Why the other answers are wrong
- B, A low power amplifier that uses a differential amplifier for improved linearity: Differential stages for linearity are found in low-level linear amplifiers such as op-amps; Class D is defined by switching operation.
- C, An amplifier that uses drift-mode FETs for high efficiency: "Drift-mode FETs" is not a real device type; Class D uses ordinary MOSFETs, and its efficiency comes from switching operation.
- D, An amplifier biased to be relatively free from distortion: Biasing for low distortion describes Class A; a Class D amplifier's switched output is rich in harmonics and must be filtered.