Amateur Extra Question E7E06
E7E: Modulation and demodulation: reactance, phase, and balanced modulators; detectors; mixers
Why is de-emphasis used in FM communications receivers?
- For compatibility with transmitters using phase modulation (correct answer)
- To reduce impulse noise reception
- For higher efficiency
- To remove third-order distortion products
Correct answer: A, For compatibility with transmitters using phase modulation
Explanation
In phase modulation, the effective frequency deviation grows with audio frequency as well as with amplitude. That makes PM behave like FM with built-in 6 dB-per-octave pre-emphasis. Receiver de-emphasis rolls off the highs at the matching rate, so audio from PM transmitters sounds flat and natural. As a bonus, it also reduces high-frequency hiss.
Why the other answers are wrong
- B, To reduce impulse noise reception: Impulse noise such as ignition pops is handled by limiters and noise blankers; de-emphasis only reshapes the audio response and mainly trims hiss.
- C, For higher efficiency: De-emphasis is a simple audio filter; it has no effect on transmitter or receiver power efficiency.
- D, To remove third-order distortion products: Third-order products come from nonlinear amplifiers and mixers; once created they fall in-band, and a frequency-shaping network cannot remove them.