Amateur Extra Question E7E07
E7E: Modulation and demodulation: reactance, phase, and balanced modulators; detectors; mixers
What is meant by the term “baseband” in radio communications?
- The lowest frequency band that the transmitter or receiver covers
- The frequency range occupied by a message signal prior to modulation (correct answer)
- The unmodulated bandwidth of the transmitted signal
- The basic oscillator frequency in an FM transmitter that is multiplied to increase the deviation and carrier frequency
Correct answer: B, The frequency range occupied by a message signal prior to modulation
Explanation
Baseband is the frequency range that the message signal itself occupies before it modulates a carrier. For a voice channel that is roughly 300 to 3000 Hz, and the term covers raw data streams too. Modulation shifts this information up to RF, and demodulation brings it back down to baseband.
Why the other answers are wrong
- A, The lowest frequency band that the transmitter or receiver covers: This confuses baseband with the lowest band a radio tunes; baseband describes the message signal, not the radio's coverage.
- C, The unmodulated bandwidth of the transmitted signal: An unmodulated carrier occupies essentially no bandwidth, and baseband refers to the message before modulation, not to the transmitted signal.
- D, The basic oscillator frequency in an FM transmitter that is multiplied to increase the deviation and carrier frequency: This describes the low-frequency oscillator ahead of the multiplier stages in some FM transmitters, not the baseband message signal.