Amateur Extra Question E7G05
E7G: Operational amplifiers: characteristics and applications
How can unwanted ringing and audio instability be prevented in an op-amp audio filter?
- Restrict both gain and Q (correct answer)
- Restrict gain but increase Q
- Restrict Q but increase gain
- Increase both gain and Q
Correct answer: A, Restrict both gain and Q
Explanation
High Q in an active filter means sharp resonance and a long, slowly decaying response, which is heard as ringing. High gain brings the feedback loop closer to oscillation, which causes instability. Keeping both the gain and the Q of each stage moderate gives a well-damped, stable filter. Designers often cascade several low-Q stages rather than use one very sharp stage.
Why the other answers are wrong
- B, Restrict gain but increase Q: Raising Q increases ringing even if gain is limited, so it works against the goal.
- C, Restrict Q but increase gain: Raising gain pushes the circuit toward instability and oscillation, even if Q is held down.
- D, Increase both gain and Q: Increasing both gain and Q makes ringing and instability worse, the opposite of what is wanted.