Amateur Extra Question E7G06
E7G: Operational amplifiers: characteristics and applications
What is the gain-bandwidth of an operational amplifier?
- The maximum frequency for a filter circuit using that type of amplifier
- The frequency at which the open-loop gain of the amplifier equals one (correct answer)
- The gain of the amplifier at a filter’s cutoff frequency
- The frequency at which the amplifier’s offset voltage is zero
Correct answer: B, The frequency at which the open-loop gain of the amplifier equals one
Explanation
An op-amp's open-loop gain rolls off at about 6 dB per octave above a low corner frequency. Over that range, gain multiplied by frequency stays roughly constant. That constant equals the frequency where open-loop gain falls to 1 (0 dB), the unity-gain frequency. Example: with a 1 MHz gain-bandwidth, a stage with a closed-loop gain of 10 has a bandwidth of about 1 MHz / 10 = 100 kHz.
Why the other answers are wrong
- A, The maximum frequency for a filter circuit using that type of amplifier: A filter's highest usable frequency depends on the circuit design and gain, not a single fixed figure for the amplifier type.
- C, The gain of the amplifier at a filter’s cutoff frequency: Gain at a filter's cutoff depends on the filter design; gain-bandwidth is a property of the op-amp itself.
- D, The frequency at which the amplifier’s offset voltage is zero: Offset voltage is a DC error unrelated to frequency response, so it does not define gain-bandwidth.