Amateur Extra Question E7G07
E7G: Operational amplifiers: characteristics and applications
What voltage gain can be expected from the circuit in Figure E7-3 when R1 is 10 ohms and RF is 470 ohms?
- 0.21
- 4700
- 47 (correct answer)
- 24
Correct answer: C, 47
Explanation
Figure E7-3 shows an inverting op-amp amplifier. The input goes through R1 to the inverting input, RF feeds the output back to that input, and the non-inverting input is grounded. The gain is set by the resistor ratio: Av = RF / R1 = 470 Ω / 10 Ω = 47. The output is inverted, so the true gain is -47, but its magnitude is 47.
Why the other answers are wrong
- A, 0.21: A gain below 1 means the circuit loses signal. Even dividing the wrong way gives 10 Ω / 470 Ω ≈ 0.021, so 0.21 matches no correct working.
- B, 4700: 4700 comes from multiplying 10 by 470. Gain is the ratio RF / R1, not the product of the two resistances.
- D, 24: 24 is about half the right value and no op-amp gain formula gives it. Even the non-inverting form, 1 + RF/R1, would give 48, not 24.