Amateur Extra Question E7H09
E7H: Oscillators and signal sources: types of oscillators; synthesizers and phase-locked loops; direct digital synthesizers; stabilizing thermal drift; microphonics; high-accuracy oscillators
What type of frequency synthesizer circuit uses a phase accumulator, lookup table, digital-to-analog converter, and a low-pass anti-alias filter?
- A direct digital synthesizer (correct answer)
- A hybrid synthesizer
- A phase-locked loop synthesizer
- A direct conversion synthesizer
Correct answer: A, A direct digital synthesizer
Explanation
A direct digital synthesizer builds a waveform numerically. On each clock pulse, a phase accumulator adds a tuning word, and its output addresses a lookup table of waveform amplitudes. A DAC converts those values to a stepped voltage, and a low-pass filter removes the clock images and aliases. The output frequency is the tuning word times the clock frequency divided by 2^N, where N is the accumulator's width in bits.
Why the other answers are wrong
- B, A hybrid synthesizer: A hybrid synthesizer combines techniques, such as a DDS feeding a PLL, and includes a VCO and phase detector beyond the listed blocks.
- C, A phase-locked loop synthesizer: A PLL synthesizer uses a phase detector, loop filter, VCO and reference oscillator, not a phase accumulator and lookup table.
- D, A direct conversion synthesizer: Direct conversion describes a receiver architecture that mixes straight to baseband, not a synthesizer built from these blocks.