Amateur Extra Question E7H10
E7H: Oscillators and signal sources: types of oscillators; synthesizers and phase-locked loops; direct digital synthesizers; stabilizing thermal drift; microphonics; high-accuracy oscillators
What information is contained in the lookup table of a direct digital synthesizer (DDS)?
- The phase relationship between a reference oscillator and the output waveform
- Amplitude values that represent the desired waveform (correct answer)
- The phase relationship between a voltage-controlled oscillator and the output waveform
- Frequently used receiver and transmitter frequencies
Correct answer: B, Amplitude values that represent the desired waveform
Explanation
The DDS lookup table holds digital amplitude samples of one cycle of the desired waveform, usually a sine wave. The phase accumulator's output serves as the table address, and the table returns the matching amplitude value. The DAC then turns that value into an output voltage. Stepping through the table faster or slower changes the output frequency.
Why the other answers are wrong
- A, The phase relationship between a reference oscillator and the output waveform: A DDS doesn't compare a reference with its output; the clock simply steps the accumulator, so no phase relationship is stored.
- C, The phase relationship between a voltage-controlled oscillator and the output waveform: A voltage-controlled oscillator belongs to a PLL; a pure DDS has no VCO, so no such phase data exists in its table.
- D, Frequently used receiver and transmitter frequencies: Stored operating frequencies are channel memories kept by the radio's controller, not the waveform samples in a DDS table.