Amateur Extra Question E9E02
E9E: Impedance matching: matching antennas to feed lines; phasing lines; power dividers
What antenna matching system matches coaxial cable to an antenna by connecting the shield to the center of the antenna and the conductor a fraction of a wavelength to one side?
- Gamma match (correct answer)
- Delta match
- T-match
- Stub match
Correct answer: A, Gamma match
Explanation
In a gamma match, the coax shield connects to the center of the driven element, which is a low-voltage point. The center conductor connects through a series capacitor to a rod that runs parallel to the element and taps it a short distance to one side. Moving the tap point sets the resistance, and the capacitor cancels the rod's inductive reactance, matching unbalanced coax to the element.
Why the other answers are wrong
- B, Delta match: A delta match fans a balanced line out to two points spaced symmetrically on each side of center, rather than tapping only one side.
- C, T-match: A T-match is a balanced, two-sided version of the gamma, with taps on both sides of center instead of just one.
- D, Stub match: A stub match uses a length of open or shorted transmission line connected along the feed line, not a tap on the antenna element.