Amateur Extra Question E9E04
E9E: Impedance matching: matching antennas to feed lines; phasing lines; power dividers
What is the purpose of the series capacitor in a gamma match?
- To provide DC isolation between the feed line and the antenna
- To cancel unwanted inductive reactance (correct answer)
- To provide a rejection notch that prevents the radiation of harmonics
- To transform the antenna impedance to a higher value
Correct answer: B, To cancel unwanted inductive reactance
Explanation
In a gamma match, the rod running parallel to the driven element and its shorting strap form a section that acts like an inductance. The tap point gives the right resistance, but it also adds inductive reactance. The series capacitor supplies an equal capacitive reactance that cancels it, so the feed line sees a purely resistive load near 50 Ω.
Why the other answers are wrong
- A, To provide DC isolation between the feed line and the antenna: DC isolation is only a side effect; the capacitor is sized and tuned to cancel the rod's inductive reactance, not to block DC.
- C, To provide a rejection notch that prevents the radiation of harmonics: A single series capacitor tuned for resonance with the rod's inductance does not form a harmonic trap; filtering harmonics is a job for a low-pass filter.
- D, To transform the antenna impedance to a higher value: The impedance step-up comes from where the gamma rod taps the element; the capacitor only removes reactance and does not set the resistance.