Amateur Extra Question E9F05
E9F: Transmission lines: characteristics of open and shorted feed lines; coax versus open wire; velocity factor; electrical length; coaxial cable dielectrics; microstrip
What is microstrip?
- Special shielding material designed for microwave frequencies
- Miniature coax used for low power applications
- Short lengths of coax mounted on printed circuit boards to minimize time delay between microwave circuits
- Precision printed circuit conductors above a ground plane that provide constant impedance interconnects at microwave frequencies (correct answer)
Correct answer: D, Precision printed circuit conductors above a ground plane that provide constant impedance interconnects at microwave frequencies
Explanation
Microstrip is a transmission line etched onto a printed circuit board. A trace sits on one side, and a ground plane covers the other side. The trace width, board thickness, and dielectric constant set a controlled characteristic impedance (often 50 Ω). This lets microwave circuits connect without reflections.
Why the other answers are wrong
- A, Special shielding material designed for microwave frequencies: Microstrip is not a shielding material. It is an open, unshielded PC-board conductor that carries signals as a transmission line.
- B, Miniature coax used for low power applications: Miniature coax is a separate cable type. Microstrip has no outer braid or shield; it is a flat trace over a ground plane.
- C, Short lengths of coax mounted on printed circuit boards to minimize time delay between microwave circuits: Microstrip uses no coax at all, and its purpose is controlled impedance, not reducing time delay between circuits.