Amateur Extra Question E9F04
E9F: Transmission lines: characteristics of open and shorted feed lines; coax versus open wire; velocity factor; electrical length; coaxial cable dielectrics; microstrip
What impedance does a 1/2-wavelength transmission line present to an RF generator when the line is shorted at the far end?
- Very high impedance
- Very low impedance (correct answer)
- The same as the characteristic impedance of the line
- The same as the output impedance of the RF generator
Correct answer: B, Very low impedance
Explanation
A half-wavelength line repeats its load impedance at the input, whatever its characteristic impedance. A short (near 0 Ω) at the far end therefore appears as a very low impedance to the generator. Compare a quarter-wave line, which inverts the load: a short becomes an open, and an open becomes a short.
Why the other answers are wrong
- A, Very high impedance: A very high impedance comes from a shorted quarter-wave line or an open half-wave line, not a shorted half-wave line.
- C, The same as the characteristic impedance of the line: The input equals the characteristic impedance only when the line is terminated in that impedance, not when it is shorted.
- D, The same as the output impedance of the RF generator: The generator's output impedance does not set the impedance the line presents. The load and the electrical length do.