Amateur Extra Question E9F09
E9F: Transmission lines: characteristics of open and shorted feed lines; coax versus open wire; velocity factor; electrical length; coaxial cable dielectrics; microstrip
What impedance does a 1/4-wavelength transmission line present to an RF generator when the line is shorted at the far end?
- Very high impedance (correct answer)
- Very low impedance
- The same as the characteristic impedance of the transmission line
- The same as the generator output impedance
Correct answer: A, Very high impedance
Explanation
A quarter-wave line inverts the load impedance: Zin = Z0² / ZL. A short at the far end makes ZL nearly 0, so the generator sees a very high impedance, close to an open circuit. The reflected wave travels a half wavelength out and back, which puts a voltage maximum and current minimum at the input. The line then behaves like a parallel-resonant tank circuit.
Why the other answers are wrong
- B, Very low impedance: Very low impedance is what an open-ended quarter-wave line presents; a short is inverted to a near-open, not repeated at the input.
- C, The same as the characteristic impedance of the transmission line: The input matches the characteristic impedance only when the far end is terminated in Z0, not when it is shorted.
- D, The same as the generator output impedance: A shorted stub's input impedance depends on Z0 and its electrical length, not on the generator's output impedance.