General Question G0B02
G0B: Station safety: electrical shock, grounding, fusing, interlocks, and wiring; antenna and tower safety
According to the National Electrical Code, what is the minimum wire size that may be used safely for wiring with a 20-ampere circuit breaker?
- AWG number 20
- AWG number 16
- AWG number 12 (correct answer)
- AWG number 8
Correct answer: C, AWG number 12
Explanation
The National Electrical Code requires copper conductors on a 20 A breaker to be at least AWG 12. Smaller AWG numbers mean thicker wire. A thicker wire carries more current without overheating. The breaker must trip before the wire can get hot, so the wire's ampacity must be at least the breaker rating. For comparison, AWG 14 goes with 15 A and AWG 10 with 30 A.
Why the other answers are wrong
- A, AWG number 20: AWG 20 is hookup-wire size, rated for only a few amperes; at 20 A it would overheat long before the breaker tripped.
- B, AWG number 16: AWG 16 suits light cords and low-current loads, not 20 A branch wiring; it would run dangerously hot at the breaker's limit.
- D, AWG number 8: AWG 8 would be safe, but it is much heavier than needed; the question asks for the minimum size, which is AWG 12.